Yazar "Emir, Furkan" seçeneğine göre listele
Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Behavior of steel cross members with metallic damper under a monotonic loading effect(Elsevier Science Inc, 2021) Balik, Fatih Suleyman; Bahadir, Fatih; Emir, FurkanIn the experimental study, it has been the main idea of this study to prevent buckling in the cross member under the effect of pressure load by placing a metallic damper at one end of the traditional tube cross-section cross members. In line with this idea, six test specimens were produced, and the specimens were tested under the pressure load effect (monotonic loading). In the testing of the specimens produced in 1/4 scale, dampers with the slotted steel plate were used for the two specimens and the bolted metallic dampers were used for the other two specimens. In order to make a comparison, tests were conducted without using any dampers at the ends of the steel cross members of two specimens. Another variable in the experiments was that the steel cross members were formed from profiles with two cross-sections. Because of the study, it has been observed that the dampers formed at the ends of the steel cross members contribute positively to the energy consumption properties of the specimens and to prevent buckling. Furthermore, it was concluded that by changing the details of the dampers used, the contribution of the specimens to the strength and rigidity properties could be increased.Öğe Çelik çaprazlara metalik sönümleyicilerin eklenmesi ile betonarme çerçevelerin güçlendirilmesi(Necmettin Erbakan Üniversitesi Fen Bilimleri Enstitüsü, 2020) Emir, Furkan; Balık, Fatih SüleymanDeprem davranışı yetersiz yapıların çerçeve boşluklarının arasına çelik çapraz elemanlar konularak, yapıların güçlendirilmesinde bugüne kadar birçok yöntem geliştirilmiştir. V şeklinde çelik çapraz elemanların, çerçeve içerisine uygulanması da bu yöntemlerden biridir. Çelik çapraz elemanlı yapılan güçlendirmelerde karşılaşılan en büyük problem, basınç yükü etkisinde çelik çapraz elamanlarda gerçekleşen burkulmalardır. Çelik elemanlarda oluşan bu burkulma ise yapılan güçlendirme uygulamasının sisteme katkısını önemli derecede azaltmaktadır. Deneysel olarak yapılan bu çalışmada; çelik çapraz elemanlar ile yapılan güçlendirmelerde basınç yükü etkisi altında çelik çapraz elemanlarda oluşan burkulmanın önlenebilmesi amaçlanmıştır. Bu amaç doğrultusunda ülkemizde deprem davranışı yetersiz mevcut yapıların özelliklerini yansıtabilecek özellikte, 1/4 ölçekli, tek açıklıklı, tek katlı 4 adet betonarme çerçeve üretilmiştir. Betonarme çerçevelerden üç adedi çelik çapraz elemanlar kullanarak güçlendirilmiştir. Uygulan bu güçlendirmelerin etkinliğini belirleyebilmek amacıyla betonarme çerçevelerden birisi referans numune olarak test edilmiştir. Numunelerin testleri, sabit eksenel yük ve tersinir-tekrarlanır yatay yük etkisi altında gerçekleştirilmiştir. Çalışma neticesinde; çelik çapraz elemanların ucunda teşkil edilen damperlerin, burkulma oluşumunu engelleme yönünde olumlu katkı sağlamıştır. Ayrıca damperlerin ve çelik çapraz çubukların numunelerin başlangıç rijitlik değerleri ve enerji tüketme kapasitelerini artırdığını göstermiştir.