Yazar "Jaya, Ramadhansyah Putra" seçeneğine göre listele

Listeleniyor 1 - 4 / 4
  • Küçük Resim Yok
    Öğe
    Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material
    (Nature Portfolio, 2023) Dulaimi, Anmar; Al Busaltan, Shakir; Mydin, Md Azree Othuman; Lu, Dong; Ozkilic, Yasin Onuralp; Jaya, Ramadhansyah Putra; Ameen, Arman
    In recent years, there has been a growing interest in cold asphalt emulsion mixture (CAEM) due to its numerous advantages, including reduced CO2 emissions, energy savings, and improved safety during construction and application. However, CAEM has often been considered inferior to hot mix asphalt (HMA) in terms of performance. To address this issue and achieve desirable performance characteristics, researchers have been exploring the modification of CAEM using high-cost additives like ordinary Portland cement. In this study, the focus was on investigating the effects of utilizing waste alkaline Ca(OH)(2) solution, ground granulated blast-furnace slag (GGBFS), and calcium carbide residue (CCR) as modifiers to enhance the properties of CAEM. The aim was to develop an innovative geopolymer geopolymer-based cold asphalt emulsion mixture (GCAE). The results of the study revealed that the use of waste alkaline Ca(OH)(2) solution led to an increase in early hydration, which was confirmed through scanning electron microscopy. Furthermore, the experimental findings demonstrated that waste alkaline Ca(OH)(2) solution significantly contributed to the rapid development of early-age strength in GCAE. As a result, GCAE showed great potential for utilization in pavement applications, particularly for roads subjected to harsh service conditions involving moisture and temperature. By exploring these alternative modifiers, the study highlights a promising avenue for enhancing the performance of CAEM and potentially reducing the reliance on expensive additives like ordinary Portland cement. The development of GCAE has the potential to offer improved performance and durability in pavement applications, thus contributing to sustainable and efficient road infrastructure.
  • Küçük Resim Yok
    Öğe
    Investigating the Potential of High-Density Polyethylene and Nano Clay Asphalt-Modified Binders to Enhance the Rutting Resistance of Asphalt Mixture
    (Mdpi, 2023) Abdel-Raheem, Ashraf; Dulaimi, Anmar; Mohamed, Ahmed S.; Moussa, Ghada S.; Ozkilic, Yasin Onuralp; Mashaan, Nuha; Jaya, Ramadhansyah Putra
    This study investigates the potential of two bitumen modifiers, high-density polyethylene (HDPE) and nano clay (NC), to enhance the rutting resistance of asphalt mixture. Four HDPE asphalt binders were prepared by mixing the HDPE at percentages of 2%, 4%, 6%, and 8% with the virgin binder, while four NC asphalt binders were produced by mixing the NC at percentages of 1%, 2%, 3%, and 4%. The consistency and flow of virgin binder, HDPE binders, and NC binders were evaluated by penetration, softening point, and viscosity tests. The results show a gradual increment in the binder stiffness by increasing the percentage of both modifiers. The static creep test was conducted at a temperature of 40 & DEG;C to evaluate the rutting resistance. The results confirm that both modifiers can greatly improve the rutting resistance of the asphalt mixture, where 8% HDPE and 3% NC modifications reduce the strains provoked in the asphalt mixture under loading by about 50%. According to the correlation analysis, the mixture rutting performance is highly attributed to the binder stiffness, where the lower the penetration value of the asphalt binder, the lower the strains in the asphalt mixture and the higher the stiffness modulus of the asphalt mixture.
  • Küçük Resim Yok
    Öğe
    Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete
    (Elsevier, 2023) Mydin, Md Azree Othuman; Jagadesh, P.; Bahrami, Alireza; Dulaimi, Anmar; Ozkilic, Yasin Onuralp; Abdullah, Mohd Mustafa Al Bakri; Jaya, Ramadhansyah Putra
    Researchers have shown significant interest in the incorporation of nanoscale components into concrete, primarily driven by the unique properties exhibited by these nanoelements. A nanoparticle comprises numerous atoms arranged in a cluster ranging from 10 nm to 100 nm in size. The brittleness of foamed concrete (FC) can be effectively mitigated by incorporating nanoparticles, thereby improving its overall properties. The objective of this investigation is to analyze the effects of incorporating calcium carbonate nanoparticles (CCNPs) into FC on its mechanical and durability properties. FC had a 750 kg/m3 density, which was achieved using a binder-filler ratio of 1:1.5 and a water-to-binder ratio of 0.45. The CCNPs material exhibited a purity level of 99.5% and possessed a fixed grain size of 40 nm. A total of seven mixes were prepared, incorporating CCNPs in FC mixes at the specific weight fractions of 0% (control), 1%, 2%, 3%, 4%, 5%, and 6%. The properties that were assessed included the slump, bulk density, flexural strength, splitting tensile strength, compressive strength, permeable porosity, water absorption, drying shrinkage, softening coefficient, and microstructural characterization. The results suggested that incorporating CCNPs into FC enhanced its mechanical and durability properties, with the most optimal improvement observed at the CCNPs addition of 4%. In comparison to the control specimen, it was witnessed that specimens containing 4% CCNPs demonstrated remarkably higher capacities in the compressive, splitting tensile, and flexural tests, with the increases of 66%, 52%, and 59%, respectively. The addition of CCNPs resulted in an improvement in the FC porosity and water absorption. However, it also led to a decrease in the workability of the mixtures. Furthermore, the study provided the correlations between the compressive strength and splitting tensile strength, as well as the correlations between the compressive strength and flexural strength. In addition, an artificial neural network approach was employed, utilizing k-fold cross validation, to predict the compressive strength. The confirmation of the property enhancement was made through the utilization of a scanning electron microscope. & COPY; 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
  • Küçük Resim Yok
    Öğe
    The Use of Waste Polymers in Asphalt Mixtures: Bibliometric Analysis and Systematic Review
    (Mdpi, 2023) Jwaida, Zahraa; Dulaimi, Anmar; Mydin, Md Azree Othuman; Ozkilic, Yasin Onuralp; Jaya, Ramadhansyah Putra; Ameen, Arman
    Asphalt is widely employed in road construction due to its durability and ability to withstand heavy traffic. However, the disposal of waste polymers has emerged as a significant environmental concern. Recently, researchers have used polymer waste to modify asphalt pavements as a new approach. This approach aims to improve pavement performance and address the environmental concerns of polymer waste. Researchers have demonstrated that incorporating polymeric waste into asphalt mixtures can lead to performance improvements in asphalt pavements, particularly in mitigating common distresses including permanent deformation and thermal and fatigue cracking. The current comprehensive review aims to summarize the recent knowledge on the usage of waste polymers in asphalt mixtures, encompassing their impact on performance properties and mixture design. The review also addresses different types of waste polymers, their potential benefits, challenges, and future research directions. By analyzing various studies, this review offers insights into the feasibility, effectiveness, and limitations of incorporating waste polymers into asphalt mixtures. Ultimately, this contributes to the advancement of sustainable and environmentally friendly road construction practices.