Impact Of Heat Treatment On Weight Loss During Combustion Of Laminated Veneer Lumber (LVL)

dc.contributor.authorPercin, Osman
dc.contributor.authorAltunok, Mustafa
dc.date.accessioned2024-02-23T14:49:15Z
dc.date.available2024-02-23T14:49:15Z
dc.date.issued2019
dc.departmentNEÜen_US
dc.description.abstractThis study was performed to determine the effects of heat treatment on weight loss during combustion of the laminated wood materials produced from Oriental beech (Fagus orientalis L.), scotch pine (Pinus sylvestris L.), sessile oak (Quercus petraea L.), and poplar (Populus nigra L.) veneers bonded with PVAc-D-4, PUR and MF adhesives. For this aim, the weight loss during combustion of the test samples was determined according to ASTM E 160-50. The results of this study indicated that the weight loss percentage was the highest in poplar wood (89.17%), PVAc-D-4 adhesive (89.79%) and control samples (88.69%). In the interaction of the wood materials and type of adhesive, the highest value was measured in poplar+PUR (90.93%), interaction of the wood materials and heat treatment in poplar + control samples (90.87%), in the interaction of the type of adhesive and heat treatment in PVAc-D-4 + 185 degrees C (91.10%). In the interaction of the wood material, type of adhesive and heat treatment temperature, the highest value was determined in laminated control poplar samples with PUR adhesive (93%), while the lowest in laminated scotch pine samples with MF and heat-treated at 185 degrees C (81.83%). The use of laminated and heat-treated wood material in places where in high risk of fire, impregnation of wood material with fire-retardant compounds can be suggested.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey, (TUBITAK), TOVAG Project [110O020]en_US
dc.description.sponsorshipThis study is a portion of the Ph.D thesis prepared by Osman Percin, Institute of Science and Technology, Gazi University, Ankara, Turkey. This study also, is a portion of the Project that was supported by The Scientific and Technological Research Council of Turkey, (TUBITAK), TOVAG Project Number: 110O020.en_US
dc.identifier.endpage442en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue2en_US
dc.identifier.startpage437en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12452/18066
dc.identifier.volume22en_US
dc.identifier.wosWOS:000462172000020en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal Of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHeat Treatmenten_US
dc.subjectWeight Lossen_US
dc.subjectCombustionen_US
dc.subjectAdhesiveen_US
dc.subjectWood Materialen_US
dc.titleImpact Of Heat Treatment On Weight Loss During Combustion Of Laminated Veneer Lumber (LVL)en_US
dc.typeArticleen_US

Dosyalar