The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites

Basit Öğe Kaydı
dc.contributor.authorAslan, Abdullah
dc.contributor.authorSalur, Emin
dc.contributor.authorGunes, Aydin
dc.contributor.authorSahin, Omer Sinan
dc.contributor.authorKaradag, Hakan Burak
dc.contributor.authorAkdemir, Ahmet
dc.date.accessioned2024-02-23T13:59:58Z
dc.date.available2024-02-23T13:59:58Z
dc.date.issued2021
dc.departmentNEÜen_US
dc.description.abstractThe aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process as the consolidation behavior and mechanical properties of bulk material directly depend on the cleaning of waste metallic chips. In the present investigation, spheroidal graphite cast iron (GGG-40) was employed as reinforcement material in tin bronze (CuSn10) matrix system. GGG-40 and CuSn10 chips were cleaned by ultrasonic agitation in water for 20 and 40 min. Consolidation of the cleaned metallic chips was achieved with a hot press by applying 820 MPa pressure under 450 degrees C, and the cylindrical and prismatic metal matrix composite materials with different reinforcement ratios were successfully produced. Energy-dispersive X-ray and scanning electron microscopy analyses were carried out to determine the amount of the oxide removed from the surfaces of chips. The mechanical properties of the samples were determined by hardness, porosity, compression and three-point bending tests. According to the results of the analyses, it was found that CuSn10 surfaces were cleaned from 20%, 50% and GGG-40 surfaces from 35%, 39% oxides during 20- and 40-min cleaning time, respectively. In addition, the results of the mechanical tests revealed that increased ultrasonic cleaning time improves the consolidation quality of metallic chips and it provides successful covering of GGG-40 chips by the CuSn10 chips as a result of a better structural integrity. New machinery parts with high mechanical properties can be produced as a result of recycling of the metallic chips which are available as waste in industry by appropriate cleaning process and this situation makes this study more innovative, economical and environmentally friendly research.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK) [113M141]en_US
dc.description.sponsorshipThis work was financially supported by the Scientific and Technological Research Council of Turkey (TUBITAK, No. 113M141). This study is derived from the master thesis named Production of metal matrix composites by recycling of waste metal chips and their mechanical properties.en_US
dc.identifier.doi10.1007/s12666-020-02104-6
dc.identifier.endpage118en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85096401264en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage107en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-020-02104-6
dc.identifier.urihttps://hdl.handle.net/20.500.12452/11402
dc.identifier.volume74en_US
dc.identifier.wosWOS:000591127400001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions Of The Indian Institute Of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCast Ironen_US
dc.subjectBronzeen_US
dc.subjectMetallic Chip Recyclingen_US
dc.subjectUltrasonic Cleaningen_US
dc.subjectHot Pressingen_US
dc.subjectMechanical Propertiesen_US
dc.titleThe Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu