Improving bond performance of ribbed steel bars embedded in recycled aggregate concrete using steel mesh fabric confinement
Küçük Resim Yok
Tarih
2023
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
To investigate the bond behaviour of passively confined-recycled aggregate concrete (RAC), centre pull out tests were carried out on deformed steel bar with a diameter (O) of 12 mm. The recycled concrete aggregate (RCA) replacement ratios are 0, 30, 50, and 100 %. To investigate local bond strength, a short anchorage bonded length (La) of 10 was chosen. Steel mesh fabric (SMF) cylinders were used to confine the RAC around the bonded length of the bar. SMFs have diameters of 4O and 6O. SMF cylinder reinforcement ratios were estimated to be 0, 2.33, 3.04, 3.5, and 4.56 %. To accurately estimate maximal rising ratios in bond strength response owing to RAC confinement using SMFs, all specimens are intended to fail in the pull out mode (rather than the splitting mode). Unconfined and confined pull out specimens were tested for failure mechanism, ultimate local bond strength, bond stress-slip response, and ductility. When compared to similar unconfined specimens, confinement utilising SMFs dramatically improved bond stress-slip behaviour for all specimens including RCA. Ultimate bond strengths of RAC-unconfined specimens were 3.7-24.5 % lower than those of NAC-unconfined specimens, whereas ulti-mate slips of RAC-unconfined specimens were 25-140 % higher than those of NAC-unconfined specimens. Due to the usage of SMF cylinders at various levels of RCA, the ultimate bond strength of all confined specimens was dramatically increased when compared to unconfined specimens. When compared to a control unconfined NAC-specimen, the ductility of unconfined specimens containing 30 %, 50 %, and 100 % RCA decreased by 5.7, 18.6, and 39.6 %, respectively. In comparison, when compared to similar unconfined specimens, the maximum rising ratios in the ductility of confined specimens containing 0 % RCA, 30 % RCA, 50 % RCA, and 100 % RCA are 44.2 %, 77.9 %, 52.4, and 117.7 %, respectively. A novel proposed formula is developed to compute the ultimate bond strength of RAC while taking into account the influence of concrete grade, RCA content, concrete confinement via SMF, and transverse ties, and its results agree with the experimental results.
Açıklama
Anahtar Kelimeler
Recycled Concrete, Pull Out Test, Concrete Confinement, Steel Mesh Fabric, Bond Strength, Bond Stress-Slip Response, Ductility
Kaynak
Construction And Building Materials
WoS Q Değeri
Scopus Q Değeri
Q1
Cilt
369
