THE USE OF BORAX PENTAHYDRATE OF INORGANIC FILLER IN MEDIUM DENSITY FIBERBOARD PRODUCTION

Basit Öğe Kaydı
dc.contributor.authorAkgul, Mehmet
dc.contributor.authorCamlibel, Osman
dc.date.accessioned2024-02-23T14:37:40Z
dc.date.available2024-02-23T14:37:40Z
dc.date.issued2021
dc.departmentNEÜen_US
dc.description.abstractThe aim of the study was the use of the inorganic borax pentahydrate mineral in medium density fiberboard production instead of biomass fiber and to specify the performance which physical, mechanical, combustion of produced boards. Chips used in manufacture were subjected to cooking for 4,5 minutes in Asplund defibrator at the vapor pressure of 7,6 kg/cm(2) pressure and 190 degrees C temperature. 1,6 % paraffin based on oven-dried wood fibers was added to cooked chips before the fiber processing in segments of defibrillator section. 1 % ammonium sulfate based on oven-dried wood fibers were added to fiber in the bowline. Borax pentahydrate was prepared in a separate tank in order to use the production of medium density fiberboard. Borax pentahydrate inorganic mineral was mixed with urea-formaldehyde resin. Urea-formaldehyde glue was prepared as three different solutions including the borax pentahydrate as 3 % (20 kg), 6 % (40 kg) and 9 % (60 kg) respectively. Borax pentahydrate mixed fibers were dried to 12 % moisture. Mat was formed before prepress. Daily multi-press was manufactured at 188 degrees C temperature and 32 kg/cm(2) pressure and, 270 second pressing time. Manufactured boards size were 2100 x 4900 x 18 (mm). According to this work result, 3 % and 6 % rate borax pentahydrate added medium density fiberboard boards were measured more good physical and mechanical test results compare to control boards. 9 % borax pentahydrate added medium density fiberboard boards were shown incredibly superior performance at fire resistance.en_US
dc.description.sponsorshipRepublic of Turkey; Ministry of Science and Industry and Technology; Duzce University; Divapan Integrated Wood Company [San-Tez 00653. STZ.2010-2]en_US
dc.description.sponsorshipRepublic of Turkey, the Ministry of Science and Industry and Technology and Duzce University supported this study and Divapan Integrated Wood Company as the project of San-Tez 00653. STZ.2010-2.en_US
dc.identifier.doi10.4067/s0718-221x2021000100422
dc.identifier.issn0717-3644
dc.identifier.issn0718-221X
dc.identifier.scopus2-s2.0-85103707666en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.4067/s0718-221x2021000100422
dc.identifier.urihttps://hdl.handle.net/20.500.12452/16193
dc.identifier.volume23en_US
dc.identifier.wosWOS:000672638300022en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniv Bio-Bioen_US
dc.relation.ispartofMaderas-Ciencia Y Tecnologiaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBiomass Fiberen_US
dc.subjectBorax Pentahydrateen_US
dc.subjectColor Propertiesen_US
dc.subjectCombustion Temperatureen_US
dc.subjectMechanical Propertiesen_US
dc.subjectMedium Density Fiberboarden_US
dc.subjectPhysical Propertiesen_US
dc.titleTHE USE OF BORAX PENTAHYDRATE OF INORGANIC FILLER IN MEDIUM DENSITY FIBERBOARD PRODUCTIONen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu