Properties of Heat-Treated Beech Laminated Veneer Lumber Reinforced with Carbon Fiber Fabric

dc.contributor.authorPercin, Osman
dc.contributor.authorUzun, Oguzhan
dc.date.accessioned2024-02-23T14:30:01Z
dc.date.available2024-02-23T14:30:01Z
dc.date.issued2023
dc.departmentNEÜen_US
dc.description.abstractCarbon fiber fabric reinforced laminated veneer lumber (RLVL) pieces were prepared by using heat-treated beech (Fagus orientalis Lipsky) veneers with polyurethane (PU) adhesive as the binder. Carbon fiber fabric was tested in three different locations with solid material and non-reinforced samples (on the bottom adhesive line, upper adhesive line, and upper and bottom adhesive lines-symmetrical). Prior to the manufacture of LVL and RLVL, heat treatment was conducted in a laboratory oven at three temperatures. These temperatures were 150, 170, and 190 degrees C. Tests were performed on LVL and RLVL to determine their air-dried density, modulus of rupture (MOR), and modulus of elasticity in bending (MOE). Experimental test results showed that reinforcement with carbon fiber increased the air-dried density, MOR, and MOE. In addition, carbon fiber fabric placed symmetrically close to bottom and upper surfaces gave the highest MOR and MOE values. However, locating the carbon fiber fabric closer to the bottom surface tended to give higher mechanical properties for the reinforced LVL.en_US
dc.identifier.doi10.15376/biores.18.3.4739-4753
dc.identifier.endpage4753en_US
dc.identifier.issn1930-2126
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85161370715en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage4739en_US
dc.identifier.urihttps://doi.org/10.15376/biores.18.3.4739-4753
dc.identifier.urihttps://hdl.handle.net/20.500.12452/14956
dc.identifier.volume18en_US
dc.identifier.wosWOS:001062816000016en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCarbon Fiberen_US
dc.subjectHeat Treatmenten_US
dc.subjectLvlen_US
dc.subjectMechanical Propertiesen_US
dc.subjectReinforcementen_US
dc.titleProperties of Heat-Treated Beech Laminated Veneer Lumber Reinforced with Carbon Fiber Fabricen_US
dc.typeArticleen_US

Dosyalar