Quasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: Effect of recycled polystyrene nanofiber interleaving

Basit Öğe Kaydı
dc.contributor.authorTinastepe, Mehmet Talha
dc.contributor.authorKaybal, Halil Burak
dc.contributor.authorUlus, Hasan
dc.contributor.authorErdal, Mehmet Okan
dc.contributor.authorCetin, Mehmet Emin
dc.contributor.authorAvci, Ahmet
dc.date.accessioned2024-02-23T14:02:38Z
dc.date.available2024-02-23T14:02:38Z
dc.date.issued2023
dc.departmentNEÜen_US
dc.description.abstractAlthough hybrid bolted/bonded (HBB) joints possess each joint technique's benefits, the adhesive layer performance significantly affects the load-carrying capacity of hybrid joints. Nanofiber interleaving has become an efficient solution to improve the adhesion performance of bonded and HBB joints. This paper reveals the effectiveness of polystyrene (PS) nanofibers interleaving on the mechanical properties of adhesively bonded and HBB single lap joints (SLJs). For this purpose, PS nanofibers are produced via electrospinning from wasted polymers as a nature-friendly implementation. The PS nanofiber mats were interleaved between adherends as a reinforcement layer, and specimens were tested under quasi-static tensile loading. A significant improvement was seen in the peak load value of 10% for the HBB joint, and the fracture energy of the bonded joint increased by 15% with PS nanofiber modification. The failure modes of PS-reinforced specimens developed as more gradually progressive compared to neat specimens thanks to the compatibility of the recycled PS nanofiber with the epoxy and improved adhesive layer performance with PS modification. Furthermore, the morphological analyses of post-fracture specimens were monitored to realize the damage and nano-toughness mechanisms.en_US
dc.identifier.doi10.1016/j.compstruct.2023.117445
dc.identifier.issn0263-8223
dc.identifier.issn1879-1085
dc.identifier.scopus2-s2.0-85168003490en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.1016/j.compstruct.2023.117445
dc.identifier.urihttps://hdl.handle.net/20.500.12452/11787
dc.identifier.volume323en_US
dc.identifier.wosWOS:001058721800001en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofComposite Structuresen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPolystyrene (Ps) Nanofiberen_US
dc.subjectCarbon Composite (Cc)en_US
dc.subjectHybrid Bonded/Bolted (Hbb) Jointen_US
dc.subjectMechanical Performanceen_US
dc.titleQuasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: Effect of recycled polystyrene nanofiber interleavingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu