The Effects of E-B Diesel Fuel Blends on Engine Lubricating Oil in a Single Cylinder Diesel Engine

Basit Öğe Kaydı
dc.authoridFatih Aydın: 0000-0003-4828-0649
dc.authoridHüseyin Öğüt: 0000-0001-8862-8684
dc.contributor.authorAydın, Fatih
dc.contributor.authorÖğüt, Hüseyin
dc.date.accessioned2020-01-18T21:02:55Z
dc.date.available2020-01-18T21:02:55Z
dc.date.issued2017
dc.departmentNEÜ, Ereğli Mühendislik ve Doğa Bilimleri Fakültesi, Enerji Sistemleri Mühendisliği Bölümüen_US
dc.description.abstractIn this study, biodiesel was produced by turning the raw oil, obtained from safflower seed, into Safflower Oil Methyl Ester by transesterification method. Mixing the biodiesel fuel, which was obtained from the safflower, with diesel fuel by adding bioethanol at the rate of 2.5% and 5% and volumetrically in inverse proportion, test fuels were acquired in the form of D100, E2.5B2.5D95, E5B5D90, E5B2.5D92.5 and E2.5B5D92.5. The tests of the diesel fuel and the obtained fuel blends were carried out related to the fuel features; kinematic viscosity, density, water content, pH, color, calorific value, flash point, cloud, pour and freezing points, copper strip corrosion test, iodine number, cold filter plugging point and cetane number. Also, the obtained blend was tried and examined on a four-cycle, single cylinder and on water cooled diesel engine with direct injection fuel system. The engine ran for 100 hours under partial load and the samples were taken from the engine oil at specific times and wear elements were searched. As a result of the analysis of the samples taken from engine lubricating oil, it was observed that as the engine run time increased, the wear elements in the samples increased, too. As a result of ICP oil analysis, the amount of wear elements such as iron, copper, aluminum, lead and chromium in engine lubricating oil were stated diagrammatically. It was determined that the use of E2.5B5D92.5 produced better results than the other types of fuels in terms of wear elements.en_US
dc.identifier.citationAydın, F., Öğüt, H. (2017). The effects of E-B diesel fuel blends on engine lubricating oil in a single cylinder diesel engine. International Journal of Automotive Engineering and Technologies, 6, 3, 129-139.
dc.identifier.endpage139en_US
dc.identifier.issn2146-9067en_US
dc.identifier.issue3en_US
dc.identifier.startpage129en_US
dc.identifier.urihttps://app.trdizin.gov.tr/makale/TWpRME1qY3hNUT09/the-effects-of-e-b-diesel-fuel-blends-on-engine-lubricating-oil-in-a-single-cylinder-diesel-engine
dc.identifier.urihttps://hdl.handle.net/20.500.12452/1362
dc.identifier.volume6en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofInternational Journal of Automotive Engineering and Technologiesen_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US]
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectE-B Diesel (Ethanol-Biodiesel-Diesel)en_US
dc.subjectEngine wear elementsen_US
dc.subjectLubricating oil
dc.titleThe Effects of E-B Diesel Fuel Blends on Engine Lubricating Oil in a Single Cylinder Diesel Engineen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
The Effects of E-B Diesel Fuel Blends on Engine Lubricating Oil in a Single Cylinder Diesel Engine.pdf
Boyut:
429.67 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin (Full Text)
İndir

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu